8 overall cabinet design points and 3 important considerations

How is the overall kitchen cabinet designed? We first need to do a detailed understanding to ensure that the overall cabinet is more convenient and comfortable to use. I believe that today's overall cabinet design points will give you the answer.

1. The range hood and stove should not be close to the wall as much as possible to avoid the edge of the pot and the wall conflicting.
2. On the side of the cabinet near the side wall, consider the protruding door line to avoid being affected when the door is opened and closed.

3. There should be enough operating space between the sink and the stove, not too far, otherwise running back and forth during cooking will reduce the cooking efficiency.
4. The accessories of the cabinet are more complicated. If you are decorating it yourself, you must pay attention to the installation method and master the standardized characteristics of the accessories.

5. Pay attention to the combination of the corners of the cabinet countertops and must have a reasonable area range to avoid breakage caused by the influence of the force.
6. The reserved position of the socket must be far away from the sink. The number of sockets is designed according to the number of electrical appliances. In addition, 2-3 more are reserved to prevent other sockets from being damaged or used when buying other electrical appliances.

7. The upper water pipe should not be less than 400mm, and the sewer pipe should not exceed 100mm, or not less than 200mm.

8. The standard size of the cabinet, the height of the hanging cabinet is 700 and the depth of 300, the height of the floor cabinet is 800 and the depth of 550, and the height between the floor cabinets is 700.

Three major considerations

1. It is best not to design round or irregular cabinets, and the size is not easy to grasp.
2. The net size of the side panel of the cut corner cabinet or shallow cabinet shall not be less than 60MM, so as not to affect the installation of the hinge base.
3. It is best not to design hanging cabinets or shelves for European-style range hoods. It is best to design flip doors on the hanging cabinets of Chinese-style range hoods, and the height of the door panels should be extended by more than 50MM.

That's it for the key points of the overall kitchen cabinet design shared today. Friends who like it can click on it, and if you have any knowledge you want to know, you can also leave a message below.